Graphite Machining

ORRO Manufacturing Co., Ltd. machines graphite and carbon components for high-temperature and electrical applications, where metal would melt, oxidise or contaminate. We work with isostatic and extruded graphite under dust extraction to hold fine tolerances and clean surfaces on electrodes, heat shields and furnace fixtures.

Materials We Machine

  • Isostatic graphite — fine-grain, high-strength grades for EDM electrodes and precision parts
  • Extruded graphite — cost-effective grades for larger electrodes and fixtures
  • Carbon-carbon composites — high-temperature structural components
  • Graphite-filled grades — wear and friction parts

Specifications

  • Tolerance: ±0.02 mm typical; ±0.01 mm on critical features
  • Surface finish: fine as-machined finish, free of coolant contamination
  • Grain size: down to 1–5 µm for electrode work
  • Max part size: up to 500 mm
  • Lead time: 2–3 weeks for prototypes

Machining Parameters

Parameter Typical value
Cutting speed 150 – 300 m/min
Feed per tooth 0.05 – 0.15 mm
Tooling Diamond-coated carbide / PCD
Dust extraction 1,500 – 2,500 m³/h at the cut
Coolant Dry cutting (no liquid)
Finish pass 0.1 – 0.3 mm depth, sharp tool
Achievable tolerance ±0.02 mm; ±0.01 mm on critical features
Grain size 1 – 5 µm (isostatic grades)
Edge quality Sharp, chipping-free under extraction

Applications

  • EDM electrodes — fine-detail sinking electrodes for tool and die work
  • Heat shields and crucibles — high-temperature furnace components
  • Semiconductor parts — high-purity graphite for wafer processing
  • Continuous casting dies — graphite dies and wear parts

Case Studies

EDM electrode set, fine-grain isostatic graphite — a die-making customer needed a 12-electrode set with ±0.01 mm profile on 1–5 µm grain graphite. We machined it dry under dedicated dust extraction to keep the surfaces contamination-free and delivered the full set in 10 days.

Graphite heat-shield ring, 300 mm — a vacuum-furnace builder needed a 300 mm graphite heat-shield ring with a 0.5 mm wall and ±0.1 mm concentricity. We machined it from fine-grain stock under dust extraction and shipped 40 rings in 3 weeks, each inspected for wall thickness.

Request a Quote