CNC Machining

ORRO Manufacturing Co., Ltd. runs CNC machining as its core capability — 3-axis and 4-axis milling, CNC turning and 5-axis work for non-metallic parts that must hold tight tolerances without the corrosion and weight of metal. We machine engineering plastics, composites and graphite to your drawings, from one-off prototypes to production batches.

Materials We Machine

  • PTFE — soft and chemically inert; needs sharp tooling and controlled feeds to avoid deformation
  • PEEK — high strength and temperature resistance for medical, semiconductor and aerospace parts
  • POM (Delrin) — dimensionally stable, ideal for gears, cams and precision slides
  • Nylon (PA) — tough and wear resistant for bushings, rollers and guides
  • PVC, PC, PP, UHMWPE — from rigid insulating parts to low-friction wear strips
  • Graphite & FRP — machined with dust extraction and dedicated tooling

Specifications

  • Tolerance: ±0.01 mm typical on critical features; ±0.05 mm general
  • Surface finish: Ra 0.8 µm standard; Ra 0.4 µm on request
  • Part size: up to 1200 mm envelope for milling; up to 300 mm diameter for turning
  • Lead time: 2–3 weeks for prototypes and first articles

Machining Parameters

Material Cutting speed Feed per tooth Tooling Notes
PTFE 200 – 400 m/min 0.05 – 0.15 mm Sharp uncoated carbide, high rake Air blast; avoid clamp marks
PEEK 150 – 300 m/min 0.05 – 0.12 mm Micro-grain carbide, polished flutes Stress-relieve before finish cut
POM 300 – 600 m/min 0.08 – 0.20 mm Uncoated carbide Clean chip formation, low burr
Nylon 250 – 500 m/min 0.08 – 0.18 mm Sharp carbide, generous rake Control moisture; air cool
UHMWPE 400 – 800 m/min 0.10 – 0.25 mm Very sharp, polished Light depths to avoid melting
Graphite 150 – 300 m/min 0.05 – 0.15 mm Diamond-coated carbide Dust extraction mandatory
PVC 300 – 700 m/min 0.10 – 0.20 mm Polished carbide Extract vapour; sharp edges
PC 300 – 600 m/min 0.08 – 0.18 mm Sharp uncoated carbide Anneal stock; air blast

Applications

  • Seals and gaskets — valve seats, diaphragms, piston rings and custom profiles
  • Gears and sprockets — quiet, self-lubricating drives for automation and packaging
  • Bushings and bearings — self-lubricating pivots and wear rings
  • Insulating parts — dielectric spacers, standoffs and housings

Case Studies

PEEK wafer-handling end effectors — a semiconductor equipment builder needed end effectors with ±0.02 mm pocket depth and Ra 0.8 µm on sealing faces. We machined stress-relieved PEEK rod on a 4-axis mill, air-cooled with no liquid coolant, and verified every part on a CMM. 40 pieces shipped in 3 weeks with zero rework.

Graphite furnace fixtures — a heat-treatment customer needed 150 graphite load fixtures with ±0.05 mm slots and no coolant contamination. We machined them dry with dust extraction, deburred every edge and shipped in 2 weeks with a dimensional report per batch.

  • Ceramic nozzles — alumina and zirconia parts ground and lapped after sintering
  • TIG welding ceramic cups — the pressed-and-sintered form where the thread decides the fit
  • POM machining — the plastic side of the same work, with the design rules that apply

Request a Quote