ORRO Manufacturing Co., Ltd. - Non-Metallic Precision Machining Parts
ORRO Manufacturing Co., Ltd. specializes in non-metallic precision CNC machined parts from China. Custom PTFE, PEEK, POM, Nylon, Silicone rubber, Graphite and Ceramic components for semiconductor, chemical, medical and automation industries.
What We Manufacture
Six product families, each showing its newest parts — updated every time a new part page is published
Wheels, Rollers & Casters
PU, POM, PEEK and nylon wheels for AGVs, conveyors, guide rails and pallet trucks — machined or moulded, with bearings fitted.
9 parts Browse this category →
Seals, Gaskets & O-Rings
NBR, EPDM, silicone and PTFE flat gaskets, washers, O-rings and oil seals for oil, water, steam and chemical service.
16 parts Browse this category →
Gears, Bushings & Bearings
POM gears, PEEK bushings, nylon sprockets and self-lubricating bearings — quiet running without a grease line.
19 parts Browse this category →Caps, Sleeves & Insulators
Silicone masking caps, PVC end caps, PTFE sleeves and insulating parts for coating, plating and electrical assemblies.
8 parts- PVC Vinyl End Caps for Thread & Pipe Protection
- High-Temp Silicone Bolt & Stud Protection Caps
- Insulator
Machined Plastic Parts & Sheet
POM, PTFE, PEEK, nylon, PVC and UHMWPE — custom machined parts, sheet, rod and wear strip cut to size.
11 parts- UHMWPE Chain Guide Rail
- UHMWPE Sheet, Cut-to-Size & Synthetic Ice Rink
- POM Machining — Custom Delrin Parts
Rubber, Silicone & Specialty Materials
Polyurethane, silicone, NBR and EPDM parts, plus graphite, ceramic and composite components for extreme duty.
10 parts Browse this category →Latest Products
The six most recently published part pages, newest first
Flanged Ceramic Nozzle Inserts
Machined alumina inserts with a neck, shoulder and flange, ground bore held to ±0.005 mm. Pressed into a housing, no thread needed. MOQ 100 pcs.
View Details →
TIG Welding Ceramic Cups
Alumina TIG welding cups #4 to #24, including 53N58 to 53N61S gas lens and XL bodies. 95% or 99% alumina, matched to your torch. MOQ 100 pcs.
View Details →
POM Sprocket
POM sprockets for 40P, 60P and 80 series flat-top conveyor chains — machined or moulded, round, square or keyed bore, 10 to 17 teeth.
View Details →
PU Caster Wheel
PU caster wheels with dual ball bearings and total-lock brakes — 50 mm swivel plate casters for furniture trolleys, plus heavy-duty cast iron core wheels.
View Details →
PTFE Flat Washer
PTFE flat washers and shims for chemical, food and electrical duty — virgin or glass/carbon-filled, 0.5-10 mm thick, -200 to +260 C, cut to drawing.
View Details →
FKM O-Ring
FKM O-rings for -20 to +200°C oil, fuel and chemical service. 70-90 Shore A, AS568 and metric sizes, black, brown or green, 100 pcs MOQ.
View Details →Manufacturing Capabilities
From CNC machining to molding and finishing — all under one roof
CNC Machining
Precision CNC milling and turning for non-metallic materials including PTFE, PEEK, POM, Nylon and graphite.
- ±0.01 mm tolerance
- Ra 0.8 µm finish
- Up to 1200 mm envelope
PEEK wafer-handling end effectors — 40 pcs, ±0.02 mm pocket depth, air-cooled and CMM-verified, shipped in 3 weeks with zero rework.
Graphite Machining
Specialized CNC machining of graphite components for electrodes, heat shields and semiconductor applications.
- ±0.02 mm tolerance
- 1–5 µm grain size
- Dry cutting, dust extraction
EDM electrode set — 12 electrodes, ±0.01 mm profile on 1–5 µm isostatic graphite, delivered in 10 days.
Injection Molding
Custom injection molding for plastic and rubber parts in POM, Nylon, silicone and other non-metallic materials.
- ±0.05 mm tolerance
- 15–60 s cycle time
- 1–16 cavities
POM gears, 24-tooth — 8-cavity mold on a 30 s cycle, 50,000 pcs/month at ±0.05 mm, tool qualified in 4 weeks.
Laser Cutting
Precision laser cutting of non-metallic sheets — PTFE, silicone, rubber and composite materials for gaskets and seals.
- ±0.1 mm tolerance
- 0.5–25 mm sheet
- 3–7 days lead time
FDA silicone gaskets — 20,000 pcs at ±0.1 mm cut from 1.5 mm sheet, no tooling cost, delivered in 2 weeks.
Custom CNC Machined Plastic Parts
Custom CNC machined plastic parts in PTFE, POM, nylon, PEEK and UHMWPE — ±0.01 mm, Ra 0.8 µm, 100 pc MOQ, samples in 1–3 days.
- ±0.01 mm tolerance
- Ra 0.8 µm standard, Ra 0.4 µm on request
- 100 pc minimum order
- Samples in 1–3 days, production in 7–14 days
PEEK insulating bushings — 0.5 mm wall and 0.01 mm bore, 2,000 pcs with a dimensional report per batch.
Polyurethane Processing
Custom polyurethane machining and molding for wear-resistant components, scraper blades and roller sleeves.
- 60A–95A shore
- ±0.1 mm tolerance
- PU bonded to metal cores
85A PU roller sleeves — 60 pcs bonded to steel cores and ground to ±0.1 mm on the OD, delivered in 3 weeks with hardness and bond checks.
Non-Metallic Materials
Precision CNC machined parts in engineering plastics, rubber, composites and specialty materials
Engineering Plastics
Precision CNC machined engineering plastic parts — PTFE, PEEK, POM, Nylon and PVC components for semiconductor, chemical, medical and automation applications.
Explore →Rubber & Elastomers
Custom rubber and elastomer machined and molded parts — Silicone, NBR, EPDM and Polyurethane seals, gaskets and flexible components.
Explore →Composites
CNC machined composite parts — Carbon Fiber and FRP components for lightweight, high-strength applications in aerospace, robotics and automation.
Explore →
Graphite
Precision machined graphite components — electrodes, heat shields, seals and semiconductor-grade parts with high thermal resistance and self-lubricating properties.
Explore →
Ceramics
Machinable ceramics for precision components — alumina, zirconia and silicon carbide parts for high-hardness, insulation and wear-resistant applications.
Explore →Industries We Serve
Non-metallic precision parts for demanding applications across 16 industries
Chemical Processing
PTFE and PEEK precision machined parts for chemical processing equipment — corrosion-resistant valve seats, pump linings, gaskets and seals.
Learn more →
Automation & Robotics
Non-metallic precision parts for automation equipment, robotic arms and linear motion systems — POM gears, PEEK bushings, Nylon guide wheels.
Learn more →
Electrical & Electronics
Insulating components for electrical equipment — PEEK insulators, PVC sleeves, FRP mounting plates for switchgear and control systems.
Learn more →
Food & Beverage
Food-grade non-metallic parts for food processing machinery — silicone seals, EPDM gaskets, PTFE components with FDA compliance.
Learn more →
Material Handling
Conveyor components in non-metallic materials — Nylon rollers, PU guide wheels, POM sprockets for logistics and warehouse systems.
Learn more →
Packaging Machinery
Wear-resistant non-metallic parts for packaging equipment — PU scraper blades, Nylon guide wheels, POM gears for filling and sealing machines.
Learn more →Why Choose ORRO Manufacturing
Specialized in non-metallic precision machining with deep material expertise
Material Expertise
Deep knowledge of PTFE, PEEK, POM, Nylon, Silicone and Graphite machining parameters and applications.
Precision CNC
3-axis, 4-axis and 5-axis CNC milling and turning with tolerances as tight as 0.01mm for non-metallic materials.
Fast Response
Quote within 48 hours. Sample parts in 7-15 days. Production delivery based on quantity and complexity.
ISO 9001 Quality
Strict quality management with CMM inspection reports. Material certificates and compliance documentation available.
Ready to Start Your Project?
Send us your drawings and material specifications. We'll evaluate your project and provide a quotation within 48 hours.